EasyManuals Logo
Home>Honda>Motorcycle>SH300 2009

Honda SH300 2009 User Manual

Honda SH300 2009
511 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
MAINTENANCE
4-12
Fill the crankcase with recommended engine oil
(page 4-10).
Check that the O-ring on the oil filler cap/dipstick is
in good condition, and replace it if necessary.
Install the oil filler cap/dipstick.
Recheck the oil level (page 4-10).
Make sure there are no oil leaks.
OIL CHANGE INDICATOR
• The oil change indicator appears when the dis-
tance covered by scooter arrives at the oil
change interval specified in the maintenance
schedule.
Reset the oil change indicator after each oil change.
To reset the oil change indicator, press and hold
both the trip switch and clock switch for more than 2
seconds while odd meter indicated at ignition
switch.
The indicator will disappear.
If the oil is changed before the oil change indicator
appears, be sure to reset the oil change indicator
after changing the oil.
The indicator will appears for 2 seconds, then disap-
pear.
This means the indicator is reset.
ENGINE OIL FILTER
FILTER CHANGE
Drain the engine oil (page 4-11).
Remove and discard the oil filter cartridge using the
special tool.
OIL CAPACITY:
1.2 liter (1.3 US qt, 1.1 Imp qt) after draining
1.4 liter (1.5 US qt, 1.2 Imp qt) after oil filter change
1.7 liter (1.8 US qt, 1.5 Imp qt) after disassembly
O-RING
OIL CHANGE INDICATOR
TRIP SWITCH
CLOCK SWITCH
TOOL:
Oil filter wrench 07HAA-PJ70101
OIL FILTER WRENCH
OIL FILTER CARTRIDGE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda SH300 2009 and is the answer not in the manual?

Honda SH300 2009 Specifications

General IconGeneral
BrandHonda
ModelSH300 2009
CategoryMotorcycle
LanguageEnglish

Related product manuals