MAINTENANCE
4-20
Inspect the brake hose and fittings for deterioration,
cracks, damage or signs of leakage.
Tighten any loose fittings.
Replace hose and fittings as required.
COMBINED BRAKE SYSTEM INSPEC-
TION
This model is equipped with a Combined Brake Sys-
tem.
Check the rear brake operation as follows:
Place the scooter on its centerstand.
Jack up the scooter to raise the front wheel off the
ground.
Apply the rear brake lever.
Make sure that the front wheel does not turn while
the rear brake lever is applied.
HEADLIGHT AIM
Support the scooter upright on a level surface.
Adjust the headlight beam vertically by turning the
adjusting screw.
REAR BRAKE LEVER
FRONT WHEEL
Adjust the headlight
beam as specified
by local laws and
regulations.
To Next Page
Loading...
Need help?
General
