FRAME/BODY PANELS/EXHAUST SYSTEM
3-9
UNDER COVER
Remove the following:
– floor side cover (page 3-8)
– four washer bolts
Release the radiator reserve tank over flow hose
from the hose guide.
Slide the under cover backward and release the
front tabs to remove the under cover.
Installation is in the reverse order of removal.
FRONT UPPER COVER
Remove the two special screws.
Release the two snap fit clips (page 3-4) of the front
upper cover from the front lower cover slots.
Remove the front upper cover by releasing the tabs
on the front upper cover from the front lower cover.
Installation is in the reverse order of removal.
HOSE
UNDER COVER
GUIDE
WASHER BOLTS
TABS
Be careful not to
damage the tab on
the front upper
cover.
UPPER COVER
SPECIAL SCREWS
SNAP FIT CLIPS
TABS
To Next Page
Loading...
Need help?
General
