FRAME/BODY PANELS/EXHAUST SYSTEM
3-5
LUGGAGE BOX
Remove the maintenance lid (page 3-4).
Remove the following:
– four mounting bolts
– two washer bolts
– luggage box
Installation is in the reverse order of removal.
• Make sure that the fuel hose is routed on the fuel
tank flange as shown.
GRAB RAIL
Unlock the seat lock with the ignition key and open
the seat.
Remove the three bolts, washers and grab rail.
Installation is in the reverse order of removal.
TORQUE:
Luggage box mounting bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
Luggage box mounting washer bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
LUGGAGE BOX
MOUNTING BOLTS
WASHER BOLTS
FUEL TANK FLANGE
FUEL TANK FLANGE
FUEL FEED HOSE
FUEL FEED HOSE
To Next Page
Loading...
Need help?
General
