Playing Back Recorded Video
11
Table 3-3 Timeline Controls
Record Type General
Displays video saved during normally scheduled recording
Motion Displays video saved during a motion detection event in
Displays video saved during an alarm event in the timeline.
Manual Displays video saved manually during live monitoring in
Displays 24 hours of video in the timeline.
Displays 2 hours of video in the timeline.
Displays 1 hour of video in the timeline.
Displays 30 minutes of video in the timeline.
Playing Back Recorded Video
To play back recorded video:
1. From the File Type list, select dav.
2. From the Data Src list, select the location where the video files
are stored.
The storage location is configured in Setup
Storage Setup
Destination (see Configuring Storage Settings on page 57).
3. Locate the file that you want to play back.
a. Above the calendar, select the month and year that you
want to search.
b. On the calendar, click the date that you want to search.
Recordings for the selected date appear in the timeline
(color coded according to recording type).
c. Below the calendar, click the File List button to narrow
your search by time period and/or by download format.
4. Play the file using one of the following methods:
• In the file list, double-click the file that you want to play.
• In the timeline, click a colored bar at the time that you
want to start playing from
(click
to zoom in on
the timeline), and then click the Play button.
Downloading Recorded Video
There are two ways to download recorded video: you can download a complete video file (the
maximum length is specified in Setup
Storage Setup Record Control) or you can create
and export a video clip that you have created.
To download a video file:
To Next Page
Loading...
Need help?
General
