Honeywell equIP H4W2GR1V User Manual

Configuring System Settings
61
9 Configuring System Settings
This chapter contains the following sections:
• Configuring General System Settings, page 61
• Configuring Date and Time Settings, page 61
• Configuring Account Settings, page 63
• Resetting the Camera, page 67
• Backing Up/Restoring a Configuration, page 68
• Configuring Maintenance Settings, page 68
• Upgrading the Firmware, page 69
• Viewing Version Information, page 69
• Managing Logs, page 70
• Viewing Online Users, page 71
Configuring General System Settings
You can configure the device name, user interface language, video standard, analog output,
and status LED settings on the Setup
 System Setup  General page.
To change the device name, in the Device Name field, enter a new name, and then click Save.
To change the interface language, select a language from the Language list, and then click Save . To
change the video standard, select NTSC or PAL from the Video Standard list, and then click Save.
To change the analog output, select ON or OFF from the Analog Output list, and then click Save.
To change the Max Log Quantity, enter a value between 1 and 1024, and then click Save.
Configuring Date and Time Settings
You can configure the date and time settings on the Setup  System Setup  Date & Time
page.

Honeywell equIP H4W2GR1V Specifications

General

Brand	Honeywell
Model	equIP H4W2GR1V
Category	Security Camera
Language	English