Honeywell equIP H4W2GR1V User Manual

2MP/4MP Low Light WDR IP Camera User Guide
30
Note
RTSP Over TLS is effective only for TCP protocol.
You can enable or disable RTSP Over TLS on the Setup
 Network Setup  Connection 
RTSP page.
RTSP Over TLS is disabled by default. To enable it, click ON, and then click Save.
Configuring PPPoE Settings
You can configure Point-to-Point Protocol over Ethernet (PPPoE) settings on the Setup >
Network Setup > PPPoE page.
To enable PPPoE:
1. Select the Enable check box.
2. In the User Name and Password fields, enter the user name and password that you
received from your Internet service provider (ISP).
3. Click Save to apply the settings. The camera will connect to the Internet via PPPoE after
rebooting.
Configuring DDNS Settings
You can configure Dynamic DNS (DDNS) settings on the Setup  Network Setup  DDNS
page.

Honeywell equIP H4W2GR1V Specifications

General

Brand	Honeywell
Model	equIP H4W2GR1V
Category	Security Camera
Language	English