NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012 41
Panel Program Menu (2) Program
3.3.5 Custom Action Message
A Custom Action Message appears when the MORE INFORMATION soft key is pressed when an
event is displayed on the Event Counts screen. This panel supports up to 100 Custom Action
Messages.
Figure 3.28 Custom Action Message Screen
CUSTOM ACTION MESSAGE:Enter a
number with a
value of 001 to 100 to display the
corresponding Custom Action Message, or to add or edit a message.
MESSAGE: This soft key appears after VI
EW is pressed.Press to enter/edit a custom message in the
four lines indicated. The message may be up to 160 characters.
VIEW: Press this
soft key to view the message that corresponds to the number entered in the
underlined field.
ACCEPT: Press to
save any change made to the message and return to the previous screen.
CUSTOM ACTION MESSAGE
CUSTOM ACTION MESSAGE: 001
MESSAGE
Edit
Custom
Action
Message here.
ACCEPT
VIEW BACK
NOTE: A printout of all the messages may be obtained by entering the PRINT PROGRAMMING MENU
(2) and pressing the CUSTOM ACTION MESSAGES soft key.
To Next Page
Loading...
Need help?
General
