NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012 65
Delete Program Program
3.5 Delete Program
Press the DELETE PROGRAM MENU at the PROGRAM/ALTER STATUS MENU menu to
display the screen below.
Figure 3.55 Delete Program Menu Screen
Soft Keys
CLEAR ALL PROGRAMMING: Press to remove all panel, loop, point and ACS programming
information, as well as logic and trouble zone equations. Pressing this key removes everything
except passwords. A confirmation screen will display asking the user to confirm the deletion
command. Pressing this key causes a reboot.
CLEAR:PANEL Press to rem
ove all programmed panel setting information from control panel
memory. This does not remove ACS programming. A confirmation screen will display asking the
user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR LOOPS Press to scroll
through the options: ALL, LOOP 1, LOOP 2, …, LOOP 10. Stop at
the desired option. Press ACCEPT to delete all loop programming for the selected option. Pressing
this key causes a reboot.
DELETE POINT To
delete a point, press this soft key to display the Delete Point screen.
CLEAR ACS: Press to
remove all ACS programming from panel memory. A confirmation screen
will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
ACCEPT: Press to
clear all programming for the selected loop option for CLEAR LOOPS. A
confirmation screen will display asking the user to confirm the deletion command.
DELETE PROGRAM MENU
CLEAR: PANEL CLEAR ALL PROGRAMMING
CLEAR ACS
CLEAR LOOPS: ALL ACCEPT
DELETE POINT BACK
To Next Page
Loading...
Need help?
General
