Honeywell VOYAGER 1202G BF User Manual

5 - 4
To change the number of error beeps, scan the following bar code and then scan a digit (1-9) bar code and the Save bar
code on the Programming Chart inside the back cover of this manual. Default = 1.
LED Indicators
The green and red LEDs can be programmed to be On or Off and at different brightness levels to indicate various scanner
states. Use the following bar codes to program the LED indicators.
LED Settings
Default = For Voyager 1200g - Red LED On with Laser . For Voyager 1202g and 1202g-BF - Red LED On with Laser/Red
LED Blinks when Battery is Low.
Number of Error Beeps/LED Flashes
Red LED Off
Green LED Off
Red LED On with Good Scan
Green LED On with Good Scan
Red LED On with Laser
Red LED On with Laser/
Red LED Blinks when Battery is Low
Green LED On with Laser
Red LED On when CodeGate
Disabled

Honeywell VOYAGER 1202G BF Specifications

General

Product Name	Honeywell VOYAGER 1202G BF
Category	Barcode Reader
Scanner Type	Laser
Battery-Free Technology	Yes
Scan Rate	100 scans per second
Decode Capability	1D Barcodes
Interface	USB, Keyboard Wedge, RS232, IBM 46xx (RS485)
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Weight	180g (6.3 oz)
Dimensions	180 mm x 66 mm x 92 mm (7.1 in x 2.6 in x 3.6 in)
Connectivity	Bluetooth
Radio Range	Up to 10 meters
Scan Pattern	Single Line
Humidity	5% to 95% relative humidity, non-condensing
Drop Specification	Withstands 30 drops to concrete from 1.5 m (5 ft)
Power Source	Battery-Free with Supercapacitor
Resolution	1D: 4 mil (0.102 mm), 2D: 6.7 mil (0.169mm)