168 Voyager XP User Guide
Show Data Format
See "Show Data Format" on page 100.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The program-
ming function will still occur, but in addition, the content of that programming
code is output to the terminal.
Note: This feature should not be used during normal scanner operation.
EZConfig for Scanning Introduction
EZConfig for Scanning provides a wide range of PC-based programming functions
that can be performed on a scanner connected to your PC. EZConfig for Scanning
allows you to download upgrades to the scanner's firmware, change programmed
parameters, and create and print programming barcodes. Using EZConfig for
Scanning, you can even save/open the programming parameters for a scanner.
This saved file can be e-mailed or, if required, you can create a single barcode that
contains all the customized programming parameters and mail or fax that barcode
to any location. Users in other locations can scan the barcode to load in the cus-
tomized programming.
EZConfig for Scanning Operations
The EZConfig for Scanning software performs the following operations:
Scan Data
Scan Data allows you to scan barcodes and display the barcode data in a window.
Scan Data lets you send serial commands to the scanner and receive scanner
response that can be seen in the Scan Data window. The data displayed in the Scan
Data window can either be saved in a file or printed.
To Next Page
Loading...
Need help?
General
