1-5
General Information
Weight and Dimensions
Original Packaging. Containers and materials identical to those used in factory
packaging are available from Hewlett-Packard offices. If the instrument is being
returned to Hewlett-Packard for servicing, attach a tag indicating the type of service
required, return address, model number, and full serial number. Mark the container
FRAGILE to ensure careful handling. In any correspondence, refer to the instrument
by model number and full serial number.
Other Packaging. The following general instructions should be followed when
repackaging with commercially available materials:
• Wrap instrument in heavy paper or plastic. If the instrument is being shipped to
Hewlett-Packard, attach a tag indicating the type of service required, return
address, model number and full serial number.
• Use a strong shipping container. A double wall carton made of 350 pound test
material is adequate.
• Use a layer of shock absorbing material 70 to 100 mm (3 to 4 inch) thick, around
all sides of the instrument to provide firm cushioning and prevent movement
inside the container. Protect the Front Panel controls and Rear Panel connectors
with cardboard.
• Seal shipping container securely.
• Mark shipping container FRAGILE to ensure careful handling.
• In any correspondence, refer to instrument by model number and full serial
number.
Weight and Dimensions
Weight: 18 kg (40 lb) fully loaded
Dimensions: 190mm (7.5in) high, 340mm (14in) wide, 420mm (17in) deep
(including cover).
To Next Page
Loading...
Need help?
General
