EasyManuals Logo
Home>HP>Measuring Instruments>37717C

HP 37717C Calibration Manual

HP 37717C
399 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
1-26
General Information
Specifications
single TU to be overwritten, as opposed
to the complete payload. All of the test
features which affect the TU and/or the
POH are enabled (i.e. errors and
alarms, adjust pointer. Full Rx
functionality also available).
STM-1e and STM-0/STM-1e
receiver functions
STM-1 receive input
Equalization: Automatic for cable loss
up to 12 dB at half the bit rate.
Monitor point compensation:
Monitor mode conforms to ITU-T
G.772. Monitor gain 20 to 26 dB.
STM-0 receive input
Operating level: Receiver mode is user
selectable.
STM-0 XCON: 530 mV peak nominal
STM-0 HI: 1.1 V peak nominal,
equalization up to 450 ft.
STM-0 LOW: 1.1 V peak nominal,
equalization from 450 to 900 ft.
Monitor point compensation:
Monitor mode conforms to ITU-T
G.772. Monitor gain 20 to 26 dB.
STS-3/STM-1e and STM-0/
STM-1e test and interfacing
(Option 120)
(for SDH specification see A3R)
OUT and IN ports (used for transmit)
Type: Electrical: To ITU-T G.703.
Connectors: BNC, 75 , unbalanced.
Rate: 155.52 Mb/s. 51.84 Mb/s.
Line code: 155.52 Mb/s: CMI.
51.84 Mb/s: B3ZS.
Output level: 155.52 Mb/s: ±0.5 V
±10%. 51.84 Mb/s: Output level is user
configurable.
STS-1 X CON: 530 mV peak nominal.
STS-1 HI: 1.1 V peak nominal.
STS-1 LOW: 350m V peak nominal.
Error output: B3 error output pulse on
receipt of STS-1 and STS-3 signals.
TTL pulse termination 75 or 10 k .
Simultaneous STS-3 and OC-3:
When used in conjunction with the
appropriate optical interfaces, transmit
STS-3 electrical output signal
simultaneously with OC-3 optical
output signal.
Transmitter
Clock timing: Internal: All rates.
Recovered: From SONET input (CMI
or NRZ electrical or optical)
Bits: 1.544Mb/s DS1 timing reference
as per TA-TSY-000378 Bantam, 100
nominal, unbalanced
Ext MTS: 64kb/s conforming to ITU-T
G.703, Bantam, 120 balanced*
2 Mb/s conforming to ITU-T G.811,
BNC 75 unbalanced,*
Bantam 120 balanced.*
* Available when instrument in SDH
mode.
Frequency offset generation:
Up to ±999 ppm in 0.1 ppm steps.
Error addition:

Table of Contents

Other manuals for HP 37717C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 37717C and is the answer not in the manual?

HP 37717C Specifications

General IconGeneral
BrandHP
Model37717C
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals