Huawei PowerCube 1000 User Manual

Table 12-5 Setting basic branch parameters on the LCD
Main Menu Second
-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Fifth-Level
Menu
Default
Value
Value Range
Parameters
Settings
Digital
Power
DC Output
Distribut.
Load Branch
n
Customized
Breaker
Capacity
Rated
Circuit
Breaker
Capacity
3 A to rated
capacity of the
circuit breaker
NOTE
● Set the circuit
breaker
capacity based
on the actual
load current.
● The capacity of
the circuit
breaker cannot
exceed the
through-
current
capacity of the
cable and the
rated capacity
of the circuit
breaker.
General
Power
Distribution
Branch n
Customized
Breaker
Capacity
Rated
Circuit
Breaker
Capacity
Battery
Power
Distribution
Branch n
Customized
Breaker
Capacity
Rated
Circuit
Breaker
Capacity
12.2.4.3 Setting the Branch User and Load Type
If branch usage is set to BLVD Load or Customized Load, you can set the user
and load type.
Table 12-6 Setting basic branch parameters on the LCD
Main
Menu
Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Fifth-Level
Menu
Default
Value
Value
Range
Parameters
Settings
Digital Power DC Output
Distribut.
Load Branch User None User 1 to
user 10,
None
12.2.4.4 Setting Customized Load Disconnection Parameters
Context
● Voltage mode: When an AC power failure occurs, you can perform
disconnection management based on the battery discharge voltage.
● Consumption mode: When an AC power failure occurs, disconnection
management is performed based on the backup power congured for the
load branch.
● Capacity mode: When an AC power failure occurs, you can perform
disconnection management based on the battery discharge capacity.
PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide 12 Power-on and Commissioning
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd. 125

Huawei PowerCube 1000 Specifications

General

Brand	Huawei
Model	PowerCube 1000
Category	Storage
Language	English