IBM 6400 Maintenance Information Manual

Fan Assembly, Card Cage
209
Fan Assembly, Card Cage
Removal
1. Prepare the printer for maintenance (page 152).
2. Cabinet Model: Remove the paper guide assembly (page 229).
Pedestal Model: Remove the top cover assembly (page 204).
3. Disconnect the fan cable connector:
Cabinet Model, Figure 52, page 278.
Pedestal Model, Figure 46, page 262.
4. Cabinet Model: Remove the two fan mounting screws from the bottom of
the fan. (See Figure 52, page 278, item 2.)
Pedestal Model: Remove the four fan mounting screws and nut. (See
Figure 46, page 262, items 1 through 4.)
5. Remove the card cage fan assembly from the card cage.
6. Remove the screw securing the shield to the card cage fan.
Installation
ATTENTION
Make sure to install the fan so the label faces toward the inside of the
printer. Air flow is INTO the card cage.
1. Reverse steps 2 through 6 of the removal procedure.
2. Return the printer to normal operation (page 153).

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English