Paper Transport System
41
Paper Transport System
Figure 13. Paper Transport System
A two-phase DC stepper motor, directed by the EC on the controller board,
drives two tractor sprockets by means of a toothed belt and splined shaft
pulley arrangement. The stepper motor permits extremely accurate
incremental vertical paper movement. This drive configuration is designed for
continuous, fan-folded paper three to 17 inches wide and one to six sheets
thick. For reverse paper feeding, the platen open motor opens and closes the
platen via a toothed belt. Opening the platen prevents paper jams when paper
direction is reversed—that is, paper is moved downwards—in order to view
the print area, set top of form, or allow applications to overprint forms.
Paper is positioned horizontally using the tractors and the horizontal
adjustment knob. Each tractor engages paper perforations with six sprocket
pins and locks in place with a friction lock. The horizontal adjustment knob
allows vernier positioning of the left print margin.
Paper can be positioned vertically by hand with the vertical adjustment knob.
Paper Supports
Shuttle Cover
Assembly
Tractor
Support Shaft
Horizontal
Adjustment
Knob
Tractors
Paper Path
Splined
Shaft
Vertical
Adjustment
Knob and
Splined Shaft
Pulley
Paper Feed Timing
Belt (under the cover)
To Next Page
Loading...
Need help?
General