Power-on Password
Important
This information is not available in this HMM online
format. See your IBM Servicer or IBM Authorized
Dealer for this procedure.
How to Run the Advanced Diagnostics
1. Power-on the computer.
2. When the cursor moves to the upper right, press
Ctrl+Alt+Ins to start the system program. If the IBM
logo does not appear, insert the backup copy of the
Reference Diskette into the diskette drive, press
Ctrl+Alt+Del, then repeat this step.
3. Advance to the Main Menu.
4. Press Ctrl+A to run the system checkout.
Hard Disk Partition
A protected partition on the hard disk contains the system
configuration data set, system setup programs, and
customer and advanced diagnostics. System setup and
diagnostic programs can be loaded from this partition by
pressing and holding Ctrl+Alt+Del and, as soon as the
cursor moves to the upper right corner of the display,
pressing and holding Ctrl+Alt+Ins.
132 IBM Mobile Systems HMM - Volume 1
To Next Page
Loading...
Need help?
General