General Checkout
The diagnostic tests are intended to test
only
IBM
products. Non-IBM products or modified options can give
false errors and invalid responses.
001
– Power-off the computer and all external devices.
– Check that all the cables and the power cord are
properly connected.
– Power-on the computer while holding the
Suspend/Resume switch in the On position. Check for
the following responses:
The power on indicator lights. The
Suspend/Resume indicator works as the power on
indicator when the power switch is pressed.
One long beep sounds.
Memory test begins (memory size appears on the
top-left corner of the screen) and the Easy-Setup
screen or Password Menu screen appears.
Note: If the Resume/Suspend Switch is not held in the
On position when the computer is powered-on, the user
defined screen appears.
DID EITHER THE EASY-SETUP OR PASSWORD MENU
SCREEN APPEAR?
Date/Time
Setup
Password
Test
Restart
Digitizer
Power Save
Yes No
002
Go to Step 004 on page 287.
003
– Enter the password on Password Menu screen, if it
appeared.
(Step 003 continues)
286 IBM Mobile Systems HMM - Volume 1
To Next Page
Loading...
Need help?
General