96
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D One-touch reply using the call record
The calling station’s call sign, which is stored in the
call record, can be used to quickly and easily reply.
•First,setyourowncallsign(MY).(p.85)
• After receiving a call
q Push [MENU] one or more times to display the “M3”
screen (Menu 3).
•IntheDRmode,push[MENU]onceortwicetoselect
the “D1” screen.
w Hold down [R>CS](F-3) for 1 second to set the
other station’s call sign.
•Thereceivedcallsignisdisplayedwhileholdingdown
[R>CS](F-3), and after releasing, two beeps sound.
•Whenacallsignhasnotbeenreceivedcorrectly,error
beeps sound, and no call sign is set.
e Push [PTT] on the microphone to reply the call. (or
push [TRANSMIT] on the transceiver)
r Release [PTT] to receive. (or push [TRANSMIT]
again)
• Selecting a call record
q Push [MENU] one or more times to display the “M3”
screen (Menu 3).
•IntheDRmode,push[MENU]onceortwicetoselect
the “D1” screen.
w While holding down [R>CS](F-3), rotate [MAIN
DIAL] to select the desired record channel, then re-
lease [R>CS](F-3) to set it.
e Push [PTT] on the microphone to reply the call. (or
push [TRANSMIT] on the transceiver)
r Release [PTT] to receive. (or push [TRANSMIT]
again)
✔For your information
When you receive a call addressed to your own call
sign, the call signs of the calling station and the re-
peaters they used can be automatically set for a quick
reply. The set call signs are overwritten if another call
is received.
The following items must be set to “Auto” in the DV Set
mode.
These functions are not available in the DR mode.
•“RXCallSignWrite”item(p.118):
The calling station’s call sign is automatically set to
“UR.”
•“RXRPTWrite”item(p.119):
The repeater call signs are automatically set to “R1”
and “R2,” if necessary.
[R>CS]
[MAIN DIAL]
[TRANSMIT]
CS CD R>CS UR DSET
M3
JG3YMK/6
Hold down
The received call sign is displayed while hold-
ing down [R>CS](F-3).
Important!
One-touch call signs are for only temporary use. They
are not saved in a call sign memory. Therefore, when
another call sign is set, the previous call sign will be
over-written.
If you want to save the set call sign, see ‘Copying the
call record contents into call sign memory’ for details.
(p. 98)
To Next Page
Loading...
Need help?
General
