Icom IC-9100 User Manual

128
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Latitude data programming
u When “LAT” is selected, rotate [MAIN DIAL] to
enter the desired latitude data.
  •Acursorblinksontheprogrammabledigit.
  •Push[Ω ≈](F-3) to select the digit.
  •Select“N”toinputN;Northlatitude.
  •Select“S”toinputS;Southlatitude.
  •Youcannotusethekeypadkeys.
i Push [Y](F-1) or [Z](F-2) to save the pro-
grammed latitude data, and select other item.
Longitude data programming
o When “LON” is selected, rotate [MAIN DIAL] to
enter the desired longitude data.
  •Acursorblinksontheprogrammabledigit.
  •Push[Ω ≈](F-3) to select the digit.
  •Select“W”toinputW;Westlongitude.
  •Select“E”toinputE;Eastlongitude.
  •Youcannotusethekeypadkeys.
!0 Push [Y](F-1) or [Z](F-2) to save the pro-
grammed longitude data, and select other
items.
Time data programming
!1 When “TIME” is selected, rotate [MAIN DIAL] to
enter the desired time data.
  •Acursorblinksontheprogrammabledigit.
  •Push[Ω ≈] to move the cursor forward and back-
ward.
  •Youcannotusethekeypadkeys.
!2 Push [Y](F-1) or [Z](F-2) to save the pro-
grammed time data, and select other item.
Memory bank setting
!3 When “BANK” is selected, rotate [MAIN DIAL] to
select the desired bank letter.
!4 Push [EDT](F-4) to enter the bank name pro-
gramming mode.
  •Acursorappearsandblinks.
!5 Repeat steps w through r of ‘Name programming’
on the previous page to program a bank name of
up to 9 characters.
!6 Push [MENU] to save the programmed bank
name, and return to the “ADD” screen.
y After programming, hold down [WR](F-5) for 1 sec-
ond to write the data into the GPS memory, and
return to the “GPM” screen (GPS Memory).
u Push [MENU] two times to return to the “GPS”
screen.
ÚÙ Ω≈ WR
ADD
LAT : 0º 00. 00’ N
• To program a latitude or longitude
Select the item
Select the digit Write into the
GPS memory
Blinks
(This illustration is based on entering a latitude.)
North latitude
is selected.
• To program a time data
ÚÙ Ω≈ WR
ADD
TIME:−−:−−:−−
Select the item Select the digit Write into the
GPS memory
Blinks
• To program a bank name
ÚÙ EDT WR
ADD
BANK:
≈
A
Bank A is selected.
Push
Ω abc ≈ DEL SPC
ADD
BANK:
≈
A
Input a space
Delete a character
Move cursor forward
Move cursor backward
Select the character type
Blinks

Icom IC-9100 Specifications

General

Brand	Icom
Model	IC-9100
Category	Transceiver
Language	English