EasyManuals Logo
Home>Icom>Receiver>IC-R30

Icom IC-R30 User Manual

Icom IC-R30
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
8
Bluetooth
®
OPERATION
8-2
Operating Bluetooth
®
The receiver has a built-in Bluetooth unit. You can connect Bluetooth headsets, or other
Bluetooth devices. When you connect a Bluetooth headset to the receiver, you can
wirelessly receive.
L The communication range of Bluetooth is approximately 10 meters (33 feet).
L These instructions describe pairing with the VS-3 Bluetooth
®
headset, as an example.
L Refer to the BASIC MANUAL to pair, disconnect or delete devices.
D Turning ON the Bluetooth function
[MENU] > Bluetooth Set > Bluetooth
1. Push [MENU].
2. Select “Bluetooth” in the “Bluetooth Set” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select “ON,” and then push [ENTER].
L Push [CLEAR] to return to the Main screen.
NOTE:
The Bluetooth communication range may vary, depending on the environment where you
operate the device.
When you use a Bluetooth device, pay attention to the following:
Bluetooth devices operate in the 2.4 GHz band. The 2.4 GHz band is also used by other
devices, such as Wireless LAN products, microwave ovens, RFID systems, amateur radio
stations, and so on.
When using this device near such devices, interference may occur, causing a decrease in
communication speed, and an unstable connection. In such cases, use this device away
from the other devices, or stop using those devices.

Table of Contents

Other manuals for Icom IC-R30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-R30 and is the answer not in the manual?

Icom IC-R30 Specifications

General IconGeneral
BrandIcom
ModelIC-R30
CategoryReceiver
LanguageEnglish

Related product manuals