5
GPS OPERATION
5-28
■ GPS Logger function (Continued)
D The <<GPS Logger Only>> mode
The receiver has an exclusive GPS Logger mode where only the GPS Logger functions.
This mode is useful when you are traveling and do not want to use the receiver for
communication, but you do want to use just the GPS Logger.
D <<GPS Logger Only>> outline
To use GPS Logger function, do the following:
1. Insert a microSD card (User supplied).
2. Confirm that the GPS receiver is receiving your position data. (p. 5-4)
3. Confirm that the GPS Logger function is ON. (p. 5-24)
4. Turn ON the <<GPS Logger Only>> mode.
↓
Completed.
You can start using the <<GPS Logger Only>> mode.
D Setting the <<GPS Logger Only>> mode
1. Push [QUICK].
2. Select “<<GPS Logger Only>>.”
(Rotate [DIAL] to select it, and then push [ENTER].)
• “Only GPS Logger is now functioning.” is displayed.
L You can also select the <<GPS Logger Only>> mode on the MENU screen.
([MENU] > GPS > GPS Logger > <<GPS Logger Only>>)
TIP: To cancel the <<GPS Logger Only>> mode
Turn OFF the receiver, then turn it ON again.
L When the receiver is tuned ON again, the normal GPS Logger function is still ON.
L While in the GPS Logger Only mode, you cannot operate the receiver except the GPS
Logger function.
To Next Page
Loading...
Need help?
General
