4
MEMORY OPERATION
4-2
■ General description
The Memory mode is very useful to quickly select often-used operating settings.
The receiver has 2000 regular memory channels and 100 memory groups. Up to 100
channels can be assigned to a group.
NOTE:
Memory data may be erased by static electricity, electric transients, and other causes.
In addition, they can be erased by a malfunction and during repairs. Therefore, we
recommend that memory data be backed up by saving it to a microSD card or to a PC.
• The microSD card is user supplied.
• The CS-R30
cloning software that is included on the supplied CD can also be used to
backup the memory data.
D Memory channel contents
A single memory channel stores following items.
L Contents differs, depending on the receive mode.
• Memory name
• Frequency
• Tuning step
• Receive mode
• Duplex direction (DUP+/DUP–)
• Frequency offset
• RF Gain setting
• Scan skip setting
• Tone squelch or DTCS squelch setting*
1
• VSC (Voice Squelch Control) setting*
2
• D.SQL (Digital code squelch) setting*
3
• Descrambler setting*
4
• Decryption setting*
5
• GPS position data
*
1
Only FM and FM-N
*
2
Only FM, FM-N, WFM, AM and AM-N
*
3
Only Digital
*
4
Only dPMR
*
5
Only NXDN-VN, NXDN-N and DCR
To Next Page
Loading...
Need help?
General
