6
MENU SCREEN
6-18
■ Function
Auto Power OFF (Default: OFF)
[MENU] > Function > Auto Power OFF
Select whether or not to automatically turn OFF the receiver after inactivity for this set
period of time.
L “AUTO POWER OFF” is displayed and beeps sound 5 seconds before turning OFF the
receiver. If you operate the receiver during this period of time, the Auto Power OFF timer is
reset.
• OFF: Does not turn OFF the receiver.
• 30/60/90/120min: Turns OFF the receiver after inactivity for this set period of time.
• No Signal: The receiver will turn OFF when no signal is continuously received for
3 minutes.
Power Save (Default: Auto (Short))
[MENU] > Function > Power Save
Set the Power Save function to reduce current drain and conserve battery power.
When the Power Save function is activated, the call sign or the beginning of the signal
may not be received correctly.
• OFF: Turns OFF the function.
• Auto (Short): This function is activated in a 1:3 ratio (10 milliseconds:
30 milliseconds) when no signal is received for 5 seconds.
• Auto (Middle): This function is activated in a 1:3 ratio (10 milliseconds:
30 milliseconds) when no signal is received for 5 seconds.
*
1
The ratio becomes 1:10 (10 milliseconds: 100 milliseconds) when
no signal is received for another 30 seconds.
• Auto (Long): This function is activated in a 1:3 ratio (10 milliseconds:
30 milliseconds) when no signal is received for 5 seconds.
*
2
The ratio becomes 1:30 (10 milliseconds: 300 milliseconds) when
no signal is received for another 30 seconds.
NOTE: The Power Save function is disabled when using an external power source, or
if the receiving mode is set to LSB, USB, CW, or CW-R.
Standby
OFF
10 milliseconds 10 milliseconds 10 milliseconds
30 milliseconds
5 seconds of
no signal
30 seconds 30 seconds
*
1
*
2
To Next Page
Loading...
Need help?
General
