Icom IC-R30 User Manual

4
MEMORY OPERATION
4-12
■ Entering a group/memory name
You can assign a name of up to 16 characters to each channel group (00 ~ 99) and
memory channel.
L You cannot change the group name of Auto MW and Skip channels (Groups “A” and “S”).
1. Push [MW].
2. Select “Manage Memory.”
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select the group.
4. Select the channel to enter a name.
5. Push [QUICK].
6. Select “Edit.”
• The Memory edit screen is displayed.
7. Select “NAME.”
• The Memory name edit screen is displayed.
8. Enter the Memory name, then push [ENTER].
• Returns to the Memory edit screen and the entered Memory name is displayed.
L Refer to page iv to enter characters.
9. Push [QUICK].
10. Select “Overwrite.”
• A conrmation dialog appears.
11. Select “Yes.”
• Beeps sound, then returns to the Memory channel screen.
L Push [CLEAR] to return to the Main screen.
TIP: Entering a group name
On the Memory Group list screen, select a group and
push [QUICK] then select “Edit Name.”
• The Group Name edit window appears.
Edit screen Name edit screen

Icom IC-R30 Specifications

General

Brand	Icom
Model	IC-R30
Category	Receiver
Language	English