Intel 386 User Manual

Intel386™ EX EMBEDDED MICROPROCESSOR USER’S MANUAL
D-16
D.11 DMACMD1
DMA Command 1
DMACMD1
(write only)
Expanded Addr:
ISA Addr:
Reset State:
F008H
0008H
00H
7 0
— — —PRE —CE— —
Bit
Number
Bit
Mnemonic
Function
7–5 — Reserved; for compatibility with future devices, write zeros to these bits.
4 PRE Priority Rotation Enable:
0 = Priority is fixed based on value in DMACMD2.
1 = Enables the rotation method for changing the bus control priority
structure. That is, after the external bus master or one of the DMA
channels is given bus control, it is assigned to the lowest priority
level.
3 — Reserved; for compatibility with future devices, write zero to this bit.
2 CE Channel Enable:
0 = Enables channel 0 and 1.
1 = Disables the channels.
1–0 — Reserved; for compatibility with future devices, write zeros to these bits.

Intel 386 Specifications

General

Architecture	x86
Clock Speed	12 MHz to 40 MHz
Transistor Count	275, 000
Data Bus Width	32-bit
Address Bus Width	32-bit
Instruction Set	x86
Introduced	1985
Maximum Memory	4 GB
Operating Modes	Real mode, Protected mode, Virtual 8086 mode
MMU	Yes
Voltage	5V
Model	Intel 386
Package	PGA
Process	1.5 μm to 1 μm