– 139 –
8-1-2. Copying a pattern
2) Select the copy source pattern number from
list
.
3) Press
.
The "sewing pattern number copy screen" is
displayed.
The selected pattern (sewing pattern and cycle pattern) can be copied to any other pattern of the specied
number.
* This operation is to be carried out under the maintenance personnel mode.
Explanation is given below using copying of a sewing pattern as an example.
Selecting the sewing pattern copy function
1) Press
on the sewing screen under
the maintenance personnel mode.
The "sewing pattern number list screen" is
displayed.
<Sewing screen (Maintenance personnel mode)>
<Sewing pattern number list screen>
1) Enter the sewing pattern number to be regis-
tered using numeric keypad
.
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
.
2) The created pattern is registered by pressing
. Then, the current screen returns
to the "sewing pattern number list screen".
In the case the entered number has already
been registered, the prompt message for
overwrite conrmation is displayed.
Select the copy destination pattern number
<Sewing pattern number copy screen>
To Next Page
Loading...
Need help?
General
