– 153 –
8-4. Cycle pattern
It is possible to combine several dierent sewing
patterns as one cycle pattern for sewing.
As many as 20 steps can be input in one cycle
pattern. This function is helpful in the case several
dierent patterns are regularly repeated in a product
sewing process.
As many as 20 cycle patterns can be registered.
Copy the cycle pattern when necessary.
8-4-1. Selecting the cycle pattern
1) Press
on each sewing screen.
1 cycle
20 cycle can be registered
Step
1
Step
2
Steps 1 to 20 can
be registered
<Sewing screen (Sewing patterns)>
<Sewing pattern number management screen
(in numerical order)>
2) The "Sewing pattern number management
screen (in numerical order)" is displayed.
Cycle pattern(s) is displayed after the regis-
tered sewing patterns.
Press a desired cycle sewing data number
button
.
Press
to conrm the setting.
The "cycle sewing screen" is displayed.
<Sewing screen (Cycle pattern)>
3) Sewing of the selected cycle pattern is en-
abled.
001 002 200
To Next Page
Loading...
Need help?
General
