– 179 –
8-12. Maintenance management function
1)
held pressed for three second.
The "mode screen" is displayed.
When the set value for the counter is reached, this function gives a warning on the screen. As many as ve
dierent set values can be registered for warning.
2) Select "9. Maintenance management setting".
3) When the counter for which the set value for
warning is selected, the "warning counter
setting screen" is displayed.
4) When
is pressed, the "warning
counter type selection screen" is displayed.
<Warning counter setting screen>
To Next Page
Loading...
Need help?
General
