– 148 –
8-3. Continuous sewing pattern
8-3-1. Selecting the continuous sewing pattern
1) Press
on the sewing screen under
the maintenance personnel mode.
The "Sewing pattern selection screen" is dis-
played.
<Sewing screen (Maintenance personnel mode)>
<Sewing pattern selection screen>
2) Select
.
3) When
is pressed, the operation is
conrmed. Then, the screen returns to the
"sewing screen".
As many as 20 steps
can be joined.
As many as 20
patterns can
be registered.
・・・
001 002 200
・・・
The continuous stitching is a function created by
supposing the case where the dierent patterns are
connected and sewn, or the case where the sewing
is performed beyond max. number of stitches per
pattern, 2000 stitches. Therefore, the connected
patterns are recognized as one pattern.
Continuous stitching can sew the dierent zigzag
patterns in combination.
Changeover of the respective patterns can be set
with the number of stitches.
Continuous stitching can combine as many as 20
steps and 2000 stitches per step can be set. In addi-
tion, up to 20 patterns can be registered.
* This operation is to be carried out under the
maintenance personnel mode.
To Next Page
Loading...
Need help?
General
