– 48 –
5-2-3. Reverse feed stitching (at start) pattern
The sewing-start reverse feed stitching pattern is set as described below.
(1) Enabling the reverse feed stitching (at start) pattern
Displaying the edit screen for reverse feed stitching (at start)
Keep
held pressed for one second.
The reverse feed stitching (at start) edit screen is
displayed.
Setting the number of stitches and the number of repetitions of reverse feed stitching at the be-
ginning of sewing
Change the number of reverse feed stitches with
.
The value you have entered is conrmed by
pressing
. Then, the sewing screen is
displayed.
<Edit screen for reverse feed stitching
(start) (operator mode)>
The sewing-start reverse feed stitching pattern
can be operated when the sewing-start reverse
feed stitching function is placed in the ON state
( mark is not displayed).
If this function is placed in the OFF state, press
the sewing start reverse feed stitch button to
switch o mark display to enable the sew-
ing-start reverse feed stitching function.
(2) Changing the number of stitches and stitch length of reverse feed stitching (at start) pattern
In the case of operator mode
To Next Page
Loading...
Need help?
General
