– 35 –
4-8. Custom switch
Various operations can be allocated to hand switch
and
machine head switches
and
.
The initial values (states) are as described below.
Hand switch: Reverse feed stitching switch, input
Machine head switch 1: One-touch type changeover switch
Machine head switch 2: Mirror inversion switch, input
1) Keep
held pressed for three second.
The "mode screen" is displayed.
2) Select the "13. Hand switch setting".
3) Select the switch to be set.
4) Select the function item to be assigned to the
switch. Then, select the input signal status
( / ) .
To Next Page
Loading...
Need help?
General
