– 152 –
Creating a continuous sewing pattern
Referring to
in
"8-1-1. Creation of a new pat-
tern" p. 137
, select continuous sewing pattern
on the sewing pattern selection screen.
Then, press
.
The "new sewing pattern edit screen" is dis-
played.
<New pattern creation screen>
Setting the pattern function on a step-by-step basis
<New sewing pattern edit screen>
1) Set the pattern function with buttons
on a
step-by-step basis.
Refer to
"5-2. Sewing patterns" p. 45
.
2) The total number of steps you have set is dis-
played on the right of section
A
. The current
step is displayed on the left of section
A
. The
current step can be changed with
.
3) Press
.
The "sewing pattern number registration
screen" is displayed.
Press
to display the data discard
conrmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps
to
in
"8-
1-1. Creation of a new pattern" p. 137
.
8-3-3. Creating a new continuous sewing pattern
8-3-4. Setting the starting step of the continuous sewing pattern
In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
When
is pressed on the sewing screen
for the continuous sewing pattern, the current
step can be changed.
<Sewing screen (continuous sewing pattern)>
Selecting the new-pattern creating function
Display the "new sewing pattern creation screen" referring to
in
"8-1-1. Creation of a new pattern" p. 137
.
A
To Next Page
Loading...
Need help?
General
