– 169 –
8-7. Simple lock of the screen
Simple lock is activated by keeping
held
pressed for one second on the sewing screen.
Pictograph display
will be as shown below:
: Simple lock is enabled
: Simple lock is disabled
<Sewing screen>
Once the simple lock is enabled, operation of the buttons displayed on the screen is disabled, thereby pre-
venting maloperation.
8-8. Version information
<Mode screen>
1) Press
.
The "mode screen" is displayed.
2) Select the "7. Version".
The "version information screen" is displayed.
3) The screen returns to the previous screen by
pressing
.
When
is pressed, the "communica-
tion version information screen" is displayed.
<Version information screen>
* It is possible to set so that the simplied lock is automatically activated according to the elapsed time.
(With memory switch U402)
Refer to
"5-7. List of memory switch data" p. 109
for details.
4) When
is pressed on the "communi-
cation version information screen", the screen
returns to the "version information screen".
<Communication version information screen>
To Next Page
Loading...
Need help?
General
