Juniper EX2300 Series Hardware Guide

Ramp Warning
WARNING: When installing the device, do not use a ramp inclined at more than 10
degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10 graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus yliää 10 astea.
Averssement Ne pas uliser une rampe dont l'inclinaison est supérieure à 10 degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não ulize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados.
Varning! Använd inte ramp med en lutning på mer än 10 grader.
Rack-Mounng and Cabinet-Mounng Warnings
Ensure that the rack or cabinet in which the device is installed is evenly and securely supported. Uneven
mechanical loading could lead to a hazardous condion.
WARNING: To prevent bodily injury when mounng or servicing the device in a rack,
take the following precauons to ensure that the system remains stable. The following
direcves help maintain your safety:
• The device must be installed in a rack that is secured to the building structure.
• The device should be mounted at the boom of the rack if it is the only unit in the
rack.
• When mounng the device on a parally lled rack, load the rack from the boom
to the top with the heaviest component at the boom of the rack.
271

Juniper EX2300 Series Specifications

General

Brand	Juniper
Model	EX2300 Series
Category	Switch
Language	English