Juniper EX2300 Series Hardware Guide

NOTE: For the EX6200-48P line cards, the intrabuilding ports must use shielded intrabuilding
cabling or wiring that is grounded at both ends.
• All EX8200 switches
• EX9251
• EX9253
These switches meet the following NEBS compliance standards:
• SR-3580 NEBS Criteria Levels (Level 4 Compliance)
• GR-1089-CORE: EMC and Electrical Safety for Network Telecommunicaons Equipment
• GR-63-CORE: NEBS, Physical Protecon
• The equipment is suitable for installaon as part of the Common Bonding Network (CBN).
• The equipment is suitable for installaon in locaons where the Naonal Electrical Code (NEC)
applies.
• The baery return connecon is to be treated as an Isolated DC return (DC-I), as dened in
GR-1089-CORE.
• You must provision a readily accessible device outside of the equipment to disconnect power. The
device must also be rated based on local electrical code pracce.
Compliance Statements for Acousc Noise for EX
Series Switches
This topic applies to hardware devices in the EX Series product family, which includes EX Series
switches, the EX Series Redundant Power System (RPS), and the XRE200 External Roung Engine.
Maschinenlärminformaons-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70 dB(A)
oder weniger gemäss EN ISO 7779
Translaon: The emied sound pressure is below 70 dB(A) per EN ISO 7779.
305

Juniper EX2300 Series Specifications

General

Brand	Juniper
Model	EX2300 Series
Category	Switch
Language	English