EasyManuals Logo
Home>Juniper>Gateway>SRX220

Juniper SRX220 User Manual

Juniper SRX220
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warrantieseffective, do not use a dry chemicalfire extinguisher
to control a fire at or near a Juniper Networks services gateway. If a dry
chemical fire extinguisher is used, the unit is no longer eligible for coverage
under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
Related
Documentation
SRX220 Services Gateway General Safety Guidelines and Warnings on page 51
SRX220 Services Gateway Installation Safety Guidelines and Warnings on page 45
SRX220 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see “General Site Guidelines for Installing the
SRX220 Services Gateway” on page 29 and “SRX220 Services Gateway General Safety
Guidelines and Warnings” on page 51.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
General Site Guidelines for Installing the SRX220 Services Gateway on page 29
SRX220 Services Gateway General Safety Guidelines and Warnings on page 51
Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 72
Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
on page 79
SRX220 Services Gateway Laser and LED Safety Guidelines and Warnings
The 1-Port SFP Mini-Physical Interface Module (Mini-PIM) is equipped with laser
transmitters, which are considered Class 1 Laser Products by the U.S. Food and Drug
Administration, and they are evaluated as Class 1 Laser Products per EN 60825–1 +A11
+A2 requirements.
Copyright © 2012, Juniper Networks, Inc.56
SRX220 Services Gateway Hardware

Table of Contents

Other manuals for Juniper SRX220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX220 and is the answer not in the manual?

Juniper SRX220 Specifications

General IconGeneral
BrandJuniper
ModelSRX220
CategoryGateway
LanguageEnglish

Related product manuals