Juniper SRX220 User Manual

CHAPTER 10
Unpacking the Services Gateway
•
Unpacking the SRX220 Services Gateway on page 75
•
Verifying Parts Received with the SRX220 Services Gateway on page 76
Unpacking the SRX220 Services Gateway
The SRX220 Services Gateway is shipped in a cardboard box. The box also contains the
device accessories and the following documents:
•
SRX100, SRX210, and SRX220 Services Gateways Initial Setup Overview
•
SRX220 Services Gateway Initial Hardware Setup
•
One-Touch Configuration and Security Setup
NOTE: The device is maximally protected inside the shipping box. Do not
unpack it until you are ready to begin installation.
To unpack the SRX220 Services Gateway:
1. Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the SRX220
Services Gateway” on page 76.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 72
•
• Verifying Parts Received with the SRX220 Services Gateway on page 76
• Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
on page 79
• Installation Overview for the SRX220 Services Gateway on page 71
75Copyright © 2012, Juniper Networks, Inc.

Juniper SRX220 Specifications

General

Brand	Juniper
Model	SRX220
Category	Gateway
Language	English