Juniper SRX220 User Manual

CHAPTER 11
Installing the Mounting Hardware
•
Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount
Installation on page 79
•
Preparing the SRX220 Services Gateway for Rack-Mount Installation on page 79
•
Preparing the SRX220 Services Gateway for Wall-Mount Installation on page 80
Preparing the SRX220 Services Gateway for Rack-Mount and Wall-Mount Installation
You can mount an SRX220 Services Gateway in a rack or on a wall. See the following
topics for more information:
•
Preparing the SRX220 Services Gateway for Rack-Mount Installation on page 79
•
Preparing the SRX220 Services Gateway for Wall-Mount Installation on page 80
The mounting kits for rack and wall installation of the SRX220 Services Gateway must
be ordered separately. Contact your Juniper Networks customer service representative
for more information.
Related
Documentation
Site Preparation Checklist for the SRX220 Services Gateway on page 27•
• Unpacking the SRX220 Services Gateway on page 75
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX220 Services
Gateway on page 31
• Preparing the SRX220 Services Gateway for Rack-Mount Installation on page 79
• Preparing the SRX220 Services Gateway for Wall-Mount Installation on page 80
Preparing the SRX220 Services Gateway for Rack-Mount Installation
You can mount an SRX220 Services Gateway on four-post (telco) racks, enclosed
cabinets, and open-frame racks.
NOTE: TheSRX220 ServicesGateway does not support center-mountracks.
79Copyright © 2012, Juniper Networks, Inc.

Juniper SRX220 Specifications

General

Brand	Juniper
Model	SRX220
Category	Gateway
Language	English