CHAPTER 9
Installation Overview
•
Installation Overview for the SRX220 Services Gateway on page 71
•
Required Tools and Parts for Installing and Maintaining the SRX220 Services
Gateway on page 72
Installation Overview for the SRX220 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 24 on page 71.
Table 24: Installation Process Order for the SRX220 Services Gateway
For more information, seeTaskStep
“SRX220 Services Gateway General Safety
Guidelines and Warnings” on page 51
Review the relevant safety
guidelines.
1
“Site Preparation Checklist for the SRX220
Services Gateway” on page 27
Verify that you have prepared your
site for the installation of the
services gateway, using the
checklist.
2
“Unpacking the SRX220 Services Gateway” on
page 75
“Verifying Parts Received with the SRX220
Services Gateway” on page 76
Unpack the services gateway, and
verify that you have received all
the parts.
3
“Preparing the SRX220 Services Gateway for
Rack-Mount and Wall-Mount Installation” on
page 79
Prepare the services gateway for
installation.
4
“Installing the SRX220 Services Gateway in a
Rack” on page 83
“Installing the SRX220 Services Gateway on a
Wall” on page 86
Install the services gateway.5
“Connecting and Organizing Interface Cables for
the SRX220 Services Gateway” on page 92
Connect cables to external
devices.
6
71Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
