EasyManuals Logo
Home>Juniper>Gateway>SRX345

Juniper SRX345 Hardware Guide

Juniper SRX345
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Laser and LED Safety Guidelines and Warnings on page 121
Laser and LED Safety Guidelines and Warnings for the ACX5000 Router
Warning Statement for Norway and Sweden
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the device from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in the hardware documentation for
this device. Make sure that only authorized service personnel perform other system
services.
Keep the area around the device clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the device.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Operate the device only when it is properly grounded.
Ensure that the separate protective earthing terminal provided on this device is
permanently connected to earth.
Replace fuses only with fuses of the same type and rating.
Do not open or remove chassis covers or sheet-metal parts unless instructions are
provided in the hardware documentation for this device. Such an action could cause
severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the chassis or onto any device component. Such an action
could cause electrical shock or damage the device.
113Copyright © 2017, Juniper Networks, Inc.
Chapter 24: General Safety Guidelines and Warnings

Table of Contents

Other manuals for Juniper SRX345

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX345 and is the answer not in the manual?

Juniper SRX345 Specifications

General IconGeneral
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports8
Flash memory8000 MB
Internal memory4000 MB
CertificationFCC A, RoHS 2
Rack capacity1U
Heat dissipation420 BTU/h
Power consumption (typical)122 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Routing protocolsBGP, CLNS, MPLS, OSPF, RIP-1, RIP-2
Supported network protocolsIPv4, IPv6
Firewall securityYes
Security algorithmsIPSEC, SSL/TLS
Networking standardsIEEE 802.1p
Ethernet LAN data rates10, 100, 1000 Mbit/s
Weight and Dimensions IconWeight and Dimensions
Weight4900 g
Dimensions (WxDxH)440.9 x 370.1 x 43.6 mm

Related product manuals