Juniper SRX345 Hardware Guide

PART 3
Initial Installation and Configuration
•
Installation Overview on page 43
•
Unpacking the SRX345 Services Gateway on page 45
•
Installing the Rack Mounting Hardware on page 49
•
Installing the SRX345 Services Gateway in a Rack on page 51
•
Connecting the SRX345 Services Gateway to Ground on page 55
•
Connecting the SRX345 Services Gateway to External Devices on page 59
•
Providing Power to the SRX345 Services Gateway on page 63
•
Performing the Initial Configuration on page 67
41Copyright © 2017, Juniper Networks, Inc.

Juniper SRX345 Specifications

General

USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	8
Flash memory	8000 MB
Internal memory	4000 MB
Certification	FCC A, RoHS 2
Rack capacity	1U
Heat dissipation	420 BTU/h
Power consumption (typical)	122 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, MPLS, OSPF, RIP-1, RIP-2
Supported network protocols	IPv4, IPv6
Firewall security	Yes
Security algorithms	IPSEC, SSL/TLS
Networking standards	IEEE 802.1p
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Weight	4900 g
Dimensions (WxDxH)	440.9 x 370.1 x 43.6 mm