7. Store the brackets and bolts inside the accessory box.
8. Save the shipping carton and packing materials in case you need to move or ship the
services gateway at a later time.
Related
Documentation
Verifying Parts Received with the SRX345 Services Gateway on page 46•
Verifying Parts Received with the SRX345 Services Gateway
The SRX345 Services Gateway shipment package contains a packing list. Check the
parts in the shipment against the items on the packing list. The packing list specifies the
part numbers and carries a brief description of each part in your order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see http://www.juniper.net/support/requesting-support.html.
A fully configured services gateway contains the chassis with installed components,
listed in Table 16 on page 46, and an accessory box, which contains the parts listed in
Table 17 on page 47.
NOTE: The parts shipped with your services gateway can vary depending on
the configuration you ordered.
Table 16: Parts List for a Fully Configured SRX345 Services Gateway
QuantityComponent
11U SRX345 Services Gateway chassis with 4 Mini-PIM slots,
8 1G Ethernet ports, and 8 Gigabit Ethernet SFP ports
(includes blank covers for Mini-PIM slots).
2Mounting brackets
8Mounting screws to attach the mounting brackets to the
chassis
1RJ-45 cable
DB-9 adapter
1USB console cable with Type-A and Mini-B USB plugs
1 (for services gateways with a
single AC power supply)
2 (for servicesgatewayswith dual
AC power supplies)
Power cord appropriate for your geographical location
Copyright © 2017, Juniper Networks, Inc.46
SRX345 Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
