Adjusting the Digital Video Cassette Camera with JVC Service Support System Software
11
9.
Select the FA Camera tab in the Deck Controller window. The unit
switches to the Camera mode. The Deck Controller window changes to as
shown in the figure.
Figure 12 Deck Controller Window in FA Camera Mode
10. Select the SP mode by clicking the SP Tape Speed button.
11. Click the Recording Start/Stop button to start recording. Record for a few
minutes.
12. Click the Recording Start/Stop button again to pause recording.
13. Click the LP Tape Speed button to select the LP mode. Click the Recording
Start/Stop to continue recording.
Camera Controller
The Camera Controller window controls the camera. Use the following procedure to learn
about the Camera Controller window.
1. Select Controller from the File menu. Then select Camera.
Figure 13 Camera Controller Menu