Digital Video Cassette Technology
64
AE Hall Curve Adjustment
1. Select the AE Hall Curve procedure in the list box in the Adjustment Utility
window.
Figure 102 AE Hall Curve Adjustment
2.
Read the procedure.
3. Remove the Chart Holder from the Light Box so the camcorder is shooting
the ground glass in the Light Box.
4. Insert a ND 0.3 Neutral Density filter into the filter slot of the Light Box.
5. Click the Start button in the Adjustment Utility window. The Confirmation
window appears.
6. Click the Yes button in the Confirmation window.
7. When the adjustment is complete the Information window appears.
8. Click the OK button in the Information window.
9. Remove the filter from the filter slot of the Light Box.
This completes the AE Hall Curve adjustment.
To Next Page
Loading...
Need help?
General
