Adjusting the Digital Video Cassette Camera with JVC Service Support System Software
65
AF Filter Adjustment
1. Select the AF Filter procedure in the list box in the Adjustment Utility
window.
Figure 103 AF Filter
2.
Read the procedure.
3. Remove the Chart Holder from the Light Box so the camcorder is shooting
the ground glass in the Light Box.
4. Insert a ND 1.2 and a ND 0.4 Neutral Density filter into the filter slot of the
Light Box.
5. Click the Start button in the Adjustment Utility window. The Confirmation
window appears.
6. Click the Yes button in the Confirmation window.
7. After the adjustment has run another Confirmation window appears.
Figure 104 Confirmation Window
8.
Remove the ND 1.2 Neutral Density filter from the filter slot of the Light
Box. Then click the OK button in the Confirmation window.
9. When the adjustment is complete the Information window appears.
10. Click the OK button in the Information window.
11. Remove the filter from the filter slot of the Light Box.
This completes the AF Filter adjustment.
To Next Page
Loading...
Need help?
General
