.
MAINTENANCE
SERVICE PROCEDURE
CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER)
Clean the air conditioner air filter if it becomes clogged or if there is
dirt or oil stuck to it.
1.
Open inspection cover (1) on top of the hood, then remove
pressure air filter (2).
2.
Open inspection cover (3) under the front panel and pull up
recirculation air filter (4) to remove it.
3. Clean filters (2) and (4) with compressed air. If there is oil stuck
to the filter, or it is extremely dirty, wash it in a neutral agent.
After washing it, dry it completely before installing it again.
REMARK
If the filters cannot be cleaned with air or in water, replace them
with new ones.
4 - 35
To Next Page
Loading...
Need help?
General
