7 SPEEDOMETER 23
Press the button . Activates the flashing display
Press the button . Deactivates the flashing display
Press the button
briefly.
Changes to the next display without changes
Press the button
for 3 - 5 seconds.
Setup menu starts, stores the settings, and changes to H or
ODO.
7.1.10 Unit of measurement menu
400329-01
Condition
• The motorcycle is stationary.
– Press the button briefly and repeatedly until H appears at the bottom right of the
display.
– Press the button .
In measurement unit mode, you can change the unit of measurement.
Info
If no button is pressed for 20 seconds, the settings are automatically stored.
Press the button . Starts selection, activates Km/h display
Press the button . Activates Mph display
Press the button
briefly.
Changes to the next display, changes from selection to the
Setup menu
Press the button
for 3 - 5 seconds.
Saves and closes the Setup menu
7.1.11 Display mode SPEED/CLK (time)
400319-01
– Press the button briefly and repeatedly until CLK appears at the bottom right of
the display.
The time is shown in display mode CLK.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The display changes to the Setup menu of the clock.
Press the button
briefly.
Next display mode
7.1.12 Setting the clock
400329-01
Condition
• The motorcycle is stationary.
– Press the button briefly and repeatedly until CLK appears at the bottom right of
the display.
– Press the button for 3 - 5 seconds.
Press the button . Increases the value
Press the button . Reduces the value
Press the button
briefly.
Changes to the next value
Press the button
for 3 - 5 seconds.
Starts and exits the SETUP menu