7 SPEEDOMETER 24
7.1.13 Display mode SPEED/LAP (lap time)
400320-01
– Press the button briefly and repeatedly until LAP appears at the bottom right of
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues running after the button is pressed, 9 memory loca-
tions are occupied.
Lap 10 must be timed using the button .
Press the button . Starts or stops the clock.
Press the button . Times the current lap time, stores it and the stop watch starts
the next lap.
Press the button
for 3 - 5 seconds.
The stop watch and the lap time are reset.
Press the button
briefly.
Next display mode
7.1.14 Viewing the lap time
400321-01
Condition
• The motorcycle is stationary.
– Press the button briefly and repeatedly until LAP appears at the bottom right of
the display.
– Briefly press the button .
Press the button . Select a lap from 1–10
Press the button . No function
Press the button
for 3 - 5 seconds.
No function
Press the button
briefly.
Next display mode
7.1.15 Display mode SPEED/ODO (odometer)
400317-01
– Press the button briefly and repeatedly until ODO appears at the bottom right of
the display.
The total distance traveled is displayed in the ODO display mode.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
No function
Press the button
briefly.
Next display mode
7.1.16 Display mode SPEED/TR1 (trip master 1)
400323-01
– Press the button briefly and repeatedly until TR1 appears at the top right of the
display.
TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The TR1, A1 and S1 displays are reset to 0.0.
To Next Page
Loading...
Need help?
General
