7 SPEEDOMETER 30
7.2.7 Display mode SPEED (speed)
400317-02
– Repeatedly press the button briefly until SPEED appears on the left side of the
display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
7.2.8 Display mode SPEED/H (service hours)
400316-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
In display mode H, the service hours of the engine are displayed.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that service work is carried
out at the right intervals.
If the speedometer is in H display mode at the start of the journey, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during the journey.
Press the button
for 2–3 seconds.
The display changes to the Setup menu of the speedometer
functions.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.2.9 Setup menu
400344-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
The Setup menu displays the active functions.
Info
Repeatedly press the button briefly until the desired function is opened.
If no button is pressed for 20 seconds, the settings are automatically stored.
Briefly press the
button .
Activates the flashing display and changes to the next display
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Deactivates the flashing display and changes to the next dis-
play
Press the button
for 2–3 seconds.
No function
Wait 3–5 seconds Changes to the next display without changes
Wait 10–12 sec-
onds
Setup menu starts, stores the settings, and changes to H or
ODO.
To Next Page
Loading...
Need help?
General
